Eizo Computer Monitor L660 User Manual

User’s Manual  
Color LCD Monitor  
 
CONTENTS  
PRECAUTIONS __________________________ 4  
INTRODUCTION _________________________ 9  
About this Manual .................................................... 9  
Package Contents.................................................... 9  
Controls & Connectors........................................... 10  
1 INSTALLATION _______________________ 11  
1-1 Connecting up ................................................. 11  
PC Settings .......................................................................11  
Connecting the Cables .....................................................11  
Attaching an Arm to the Monitor .......................................13  
2 USING THE SCREENMANAGER _________ 15  
2-1 How to use the ScreenManager...................... 15  
About ScreenManager......................................................15  
ScreenManager Menus ....................................................15  
How to use the ScreenManager .......................................17  
Adjustment Lock ...............................................................18  
2-2 Screen Adjustment .......................................... 19  
About Screen Adjustments ...............................................19  
Adjustment Procedure ......................................................20  
2-3 Color Adjustment ............................................. 26  
About Color Adjustments ..................................................26  
Color Mode .......................................................................26  
Gain Adjustments .............................................................26  
2-4 Power-save Setup ........................................... 28  
Setup Procedure...............................................................28  
2-5 Other Settings ................................................. 30  
About Other Settings ........................................................30  
Screen Size ......................................................................30  
Border Intensity ................................................................31  
Input Priority .....................................................................31  
Off Timer ...........................................................................31  
Beep .................................................................................32  
Menu Position ...................................................................33  
Reset ................................................................................33  
CONTENTS  
 
2
3 MAKING USE OF USB _________________ 34  
E
Setup Procedure ............................................................. 34  
Trouble Shooting ............................................................. 36  
4 TROUBLESHOOTING _________________ 37  
5 CLEANING __________________________ 41  
6 SPECIFICATIONS _____________________ 42  
APPENDIX______________________________ i  
Pin Assignment ........................................................ ii  
Preset Timing Chart .................................................iii  
Dimensions ............................................................. vi  
Copyright© 2000 by EIZO NANAO CORPORATION. All rights reserved. No part of  
this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or  
by any means, electronic, mechanical, or otherwise, without the prior written permission of  
Eizo Nanao Corporation.  
Eizo Nanao Corporation is under no obligation to hold any submitted material or  
information confidential unless prior arrangements are made pursuant to Eizo Nanao  
Corporation's receipt of said information.  
Although every effort has been made to ensure that this manual provides up-to-date  
information, please note that EIZO monitor specifications are subject to change without  
notice.  
Apple and Macintosh are trademarks of Apple Computer Inc.,registered in the U.S. and  
other countries.  
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards  
Association.  
VGA is a registered trademark of International Business Machines Corporation in the USA  
and other countries.  
ENERGY STAR is a U.S. registered mark.  
Windows is a registered trademark of Microsoft Corporation.  
ScreenManager, PowerManager, and i·Sound are trademarks of Eizo Nanao Corporation.  
FlexScan and EIZO are registered trademarks of Eizo Nanao Corporation.  
3
CONTENTS  
 
PRECAUTIONS  
IMPORTANT!  
* The manufacturer is not responsible for damage or malfunction caused by improper  
connection. The power cord should be connected directly to a standard wall power  
outlet.  
Location of the caution statements on the back panel.  
Risk of electric shock. Do not open.  
Risque de choc electrique. Ne pas ouvrir.  
Gefahr des elektrischen schlages. Rückwand nicht entfernen.  
The equipment must be connected to a grounded main outlet.  
Jordet stikkontakt skal benyttes nár apparatet tilkobles  
datanett.  
Apparaten skall anslutas till jordat nätuttag.  
IMPORTANT!  
To ensure personal safety and proper maintenance. Please  
read this section and the caution statements on the LCD  
monitor (refer to the figure above).  
This manual uses the safety symbols below. They denote critical  
information. Please read them carefully.  
Indicates a prohibited action.  
Indicates to ground for safety.  
WARNING  
Failure to abide by the information in a WARNING may result in  
serious injury and can be life threatening.  
CAUTION  
Failure to abide by the information in a CAUTION may result in  
moderate injury and/or property or product damage.  
4
PRECAUTIONS  
 
WARNING  
E
• If the LCD monitor begins to emit smoke, smells like  
something is burning, or makes strange noises,  
disconnect all power connections immediately and contact  
your dealer for advice.  
Attempting to use a malfunctioning LCD monitor can be  
dangerous.  
• Do not dismantle the cabinet or modify the LCD monitor.  
Dismantling the cabinet or modifying the monitor may result in  
electric shock or burn.  
• Keep small objects away from the LCD monitor.  
Small objects may accidentally fall through the ventilation slots  
into the cabinet-leading to fire, shock or equipment damage.  
• Keep liquids away from the LCD monitor.  
Spillage into the cabinet may result in fire, electric shock, or  
equipment damage.  
If an object or liquid falls/spills into the cabinet, unplug the LCD  
monitor immediately. Have the unit checked by a qualified  
service engineer before using it again.  
• Do not touch a damaged LCD panel directly with bare  
hands.  
Use protective gloves whenever handling a damaged panel. The  
liquid crystal which leaks from the panel is poisonous if it enters  
the eyes or mouth. If any part of the skin or body comes in direct  
contact with the panel, please wash thoroughly. If some physical  
symptoms result, please consult your doctor.  
• Take care in disposing of the LCD monitor.  
The backlight of the LCD monitor contains mercury. Follow  
local regulations or laws for safe disposal.  
• Use the enclosed power cord. If using the power cord  
other than the enclosed one, use the following cord.  
In USA and Canada, use a UL LISTED/CSA LABELED or  
CERTIFIED power cord set meeting the following specifications:  
* Rating:  
* Type:  
min. 125 V, 10 A  
SVT  
* Length: max. 2.0 m  
* Plug type: NEMA 5-15P, Parallel blade, Grounding type,  
125 V, 10 A  
In Europe, use a proper European standard approved power cord  
meeting the following specifications:  
* Rating:  
* Type:  
min. 250 V, 10 A  
* Length: max. 2.0 m  
H05VV-F 3G 1 mm2  
Use a plug type approved by the country where you use  
Failure to do so may cause fire or electric shock.  
PRECAUTIONS  
5
 
• The equipment must be connected to a grounded main  
outlet.  
Failure to do this may result in an electric shock.  
• Handle the power cord with care.  
* Do not place the cord underneath the LCD monitor or other  
heavy objects.  
* Do not pull on the cord.  
* Do not bend, bundle or tie up the cord.  
* Never attempt to repair a damaged cord.  
If the power cord becomes damaged, stop using it. Use of a  
damaged cord may result in fire or electric shock.  
• To disconnect the power cord, grasp the plug firmly and  
pull.  
Never tug on the cord, doing so may cause damage and could  
result in fire or electric shock.  
OK  
• Use the correct voltage.  
The LCD monitor is designed for use with a specific voltage only.  
Connection to a different voltage may cause fire, electric shock,  
or other damage.  
• Do not overload your power circuit, as this may result in  
fire or electric shock.  
• To ensure proper connections of the power cord, be  
certain to plug the power cord into the provided LCD  
monitor connector and directly to a wall outlet.  
By not doing so may result in fire or electric shock.  
• Keep the plastic packing bags away from children and  
infants.  
Plastic bags can be dangerous. To avoid danger of suffocation,  
keep the bag away from babies and children.  
• Place the LCD monitor on a strong, stable surface.  
A unit placed on an inadequate surface may fall, resulting in  
injury or equipment damage.  
If the LCD monitor falls, disconnect the power immediately and  
have the unit checked by a qualified service engineer before using  
it again. Using a LCD monitor after it has been dropped may  
result in fire or electric shock.  
OK  
• When attaching the monitor to the mount, use the  
enclosed screws and tighten them securely. When  
reattaching the monitor to the tilt stand, use the screws  
that was attached to the monitor originally.  
By not doing so may result in injury or failure of the monitor. To  
attach the mount to the monitor, please read the instruction  
manual of the mount.  
6
PRECAUTIONS  
 
• Set the LCD monitor in an appropriate location.  
* Do not install in a dusty or humid environment.  
E
* Do not place near water.  
* Do not place in a location where light shines directly on the  
screen.  
* Do not place near heat generating devices or a humidifier.  
CAUTION  
• At the end of the day, or if you plan to leave the LCD  
monitor unused for an extended period, turn off the main  
power switch and disconnect the power cord from the wall  
socket so that no power connections are made.  
• To ensure safety, always unplug the LCD monitor before  
cleaning it.  
Cleaning the LCD monitor while it is plugged into a power  
outlet may result in electric shock.  
• Never use thinner, benzene, or other strong solvents or  
abrasive cleaners, as these may cause damage to the  
cabinet or LCD panel.  
• Periodically clean the area around the plug.  
Build-up of dust, water, or oil on the plug may result in fire.  
• Please keep the LCD monitor in a dust-free environment.  
Dust accumulation within the LCD monitor may result in fire or  
equipment failure.  
• Do not touch the plug or the power unit with wet hands.  
Touching the plug with wet hands is dangerous and can cause  
electrical shock.  
• When handling the LCD monitor, please refer to the  
diagram.  
Grip the bottom of the LCD monitor firmly with both hands  
ensuring the panel faces outward before lifting.  
• Handle with care to avoid scratching or damaging the panel.  
OK  
If the LCD monitor becomes damaged, disconnect the power  
immediately and have the unit checked by a qualified service  
engineer before using it again. Using a LCD monitor after it has  
been dropped may result in fire or electric shock.  
• Disconnect the power cord when moving the LCD monitor.  
Moving the LCD monitor with the cord attached or lifting it is  
dangerous. It may result in injury or equipment damage.  
PRECAUTIONS  
7
 
• Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case  
of a problem.  
• Do not block the ventilation slots on the cabinet.  
* Do not place books or any other papers on the ventilation slots.  
* Do not install the monitor in a closed space.  
* Do not use the monitor laying down or upside down.  
* Do not remove the tilt-swivel stand.  
Using the monitor in this way blocks the ventilation slots  
and prevents proper airflow, leading to fire or other damage.  
Others  
• The screen may have some defective pixels. These pixels  
may appear as slightly light or dark areas on the screen.  
This is due to the characteristics of the panel itself, and not  
the LCD product.  
• The backlight of the LCD monitor has a fixed life span.  
When the screen becomes dark or begins to flicker, please contact  
your dealer.  
Take care when handling the LCD panel.  
* Do not press on the panel or edge of the frame strongly  
as this will result in damage to the screen. There will be prints  
left on the screen if the pressed image is dark or black. Decrease  
of the prints on the screen requires to keep white desktop patterns  
on for L661, and black desktop patterns on for L680.  
* Do not scratch or press on the panel with any sharp objects, such  
as pencil or pen as this may result in damage to the panel.  
* Cleaning the panel with a dirty or rough cloth may damage the  
panel.  
Generally, for maximum viewing comfort position the LCD  
monitor slightly below eye level. Staring at the LCD monitor for  
prolonged periods can cause eye strain. Be sure to take adequate  
rests. (A 10-minute rest period each hour is suggested.)  
8
PRECAUTIONS  
 
INTRODUCTION  
AboutThis Manual  
E
This manual explains the precautions, features, specifications, and  
operation of your EIZO LCD monitor. For convenience, a  
ScreenManager Quick Referenceguide has been included which shows  
how to implement basic adjustments with the ScreenManager utility.  
Package Contents  
Power Cord  
Signal Cable  
(MD-C87/100)  
Connector Cover  
4 of 4 mm x 12 mm  
mounting screws  
LCD Monitor  
Viewing Angle L660 L661 L680  
Horizontal:  
Rear Cover  
(attached to the  
monitor)  
EIZO LCD Utility Disk  
(for Windows®/Dos/  
Macintosh)  
160° 140° 170°  
Vertical:  
160° 140° 170°  
Users Manual  
ScreenManager  
Warranty  
Quick Reference  
Registration Card  
If any of the above-listed items are missing or damaged, please contact  
your local dealer for assistance.  
We recommend that you retain the original packing materials in case of  
future need.  
9
INTRODUCTION  
 
Enter Button  
Controls & Connectors  
Control Buttons  
Front  
Up, down, right and left buttons are  
used to enter adjustments and settings  
when using the ScreenManager menu.  
Power Button  
Switches the monitors power ON and  
OFF only when the main power is ON.  
Power Indicator  
Indicates the power-on status in the  
following ways:  
Green (Solid): Power is ON  
(Flashing): Power is switching  
off in 15 minutes  
Power  
Terminal  
Covers for  
the Optional  
peripheral  
(See page 32.)  
Yellow (Solid): Power Saving Mode  
(Flashing): Power is OFF  
(Main powers ON.)  
Auto Adjustment Button  
Automatically centers the displayed image  
and adjust Clock and phase.  
Input Signal Selection Button  
Selects one of two D-Sub connectors as the active input.  
Rear  
Power  
Connector  
Power  
Switch  
4 Holes for Mounting an Arm-Stand  
2 x D-Sub mini 15 pin Input Connectors  
Maintenance Port  
Service use only.  
USB Ports (Upstream Port x 1)  
On USB ports, see page 34 for further details.  
Security Lock  
Allows for connection of a security cable.  
This lock supports the Kensingtons  
MicroSaver security system. For further  
information, please consult below:  
Kensington Technology Group  
2855 Campus Drive, San Mateo, CA  
94403 USA  
800-650-4242, x3348  
Intl: 650-572-2700, x3348  
Fax: 650-572-9675  
USB Ports  
(Downstream Port x 4)  
10  
INTRODUCTION  
 
1 INSTALLATION  
1-1 Connecting up  
E
PC Settings  
Before connecting your PC to the LCD monitor, change the display screen  
settings (resolution and frequency) in accordance with those below.  
fH: 27 kHz-82 kHz  
fV: 50 Hz-85 Hz  
The maximum resolution of this LCD monitor is 1280 x 1024 at a  
maximum fV of 75 Hz.  
Using the LCD monitor withWindows® 95/98  
A Monitor information file is saved in the EIZO LCD Utility Disk included  
in the package. It includes all the LCD required information for best  
operation with Windows 95/98. Please install the enclosed utility and select  
EIZO L660/L661/L680from the monitor list in Windows 95/98.  
For installation procedure, please read the readme.txt in the utility disk.  
Connecting the Cables  
(1)Be sure that the power switches of both the PC and the LCD monitor are  
OFF.  
(2)Remove the rear cover from the monitor. When removing the rear cover,  
push down the buttons while pulling.  
buttons  
(3)Plug the signal cable into the D-Sub connector at the rear of the monitor.  
Please ensure that the arrow mark on the casing of the connector is  
visible when connecting.  
When connecting the signal cable, check that the shape of the cable  
connector matches the shape on the LCD monitor.  
1
INSTALLATION  
11  
 
(4)Plug the other end of the cable into the video connector on the rear of  
the PC.  
Standard PC graphics board  
D-Sub mini15  
pin  
D-Sub mini15  
Standard PC  
pin  
graphics board  
Signal Cable (enclosed)  
Macintosh  
D-Sub mini15  
pin  
D-Sub mini15  
Macintosh G3  
pin  
(Blue & White)  
Signal Cable (enclosed)  
D-Sub mini15  
D-Sub 15  
pin  
D-Sub mini15  
pin  
pin  
Macintosh  
Signal Cable (enclosed)  
Macintosh Adapter DSCR-153 (optional)  
(5)Plug the power cord into the power connector on the rear of the LCD  
monitor.  
(6)Replacing the connector cover and the rear cover.  
a) Insert the rear cover into the inlets at the bottom of the stand.  
b) To close easily, the LCD monitor should be tilted forward. Attach  
the connector cover to the rear panel of the LCD.  
2
1
(7)Plug the other end of the power cord into a power outlet.  
(8)Turn on the monitors main power and then switch on the PC power.  
Whenever you finish your operation, turn off the PC and the monitor.  
1
INSTALLATION  
 
12  
Do your part to conserve energy, turn off the monitor when you  
are finished using it.  
E
Attaching an Arm Stand to the Monitor  
WARNING  
When attaching the monitor to the mount, use the enclosed screws  
and tighten them securely. When reattaching the monitor to the tilt  
stand, use the screws that was attached to the monitor.  
By not doing so may result in injury or failure of the monitor. To attach the  
mount to the monitor, please read the instruction manual of the mount.  
Use a VESA approved arm-stand. The LCD  
panel requires 100 mm x 100 mm hole spacing  
on the arm mounting pad. The arm-stand should  
be able to support an object weighing 13.5 kg.  
100 mm  
x
100 mm  
In case of using this LCD monitor with an arm-  
stand in an office workspace, the arm-stand  
shall be chosen and used carefully:  
- Use only an approved arm-stand (e.g. GS).  
- The arm-stand shall have sufficient stability  
(mechanical firmness) to support the weight  
of the monitor.  
(Example)  
- The arm-stand shall remain in that position  
where it is manually moved.  
- The arm-stand shall have the ability to tilt the  
monitor forward and backward.  
- The height of the upper row shall be less  
than or equal to 500 mm in relation to  
500 mm  
the desk surface when the arm-stand is  
in its lowest position.  
(1)Lay the LCD monitor as shown below, not scratching the panel.  
Remove the tilt loosening the screws. When reattaching the tilt, use the  
enclosed screws and fix the tilt to the monitor securely.  
Soft Cloth  
or Cushion  
1
INSTALLATION  
13  
 
(2)Place and fix a mount or an arm-stand to the monitor securely.  
Mounting  
Screws  
(enclosed):  
4x12 (mm)  
Connecting two PCs to the Monitor  
(Example)  
Macintosh Adapter  
DSCR-153 (optional)  
Apple  
Macintosh  
PC compatible  
Signal Cable (Enclosed)  
The EIZO L660/L661/L680 has two video input signal connectors  
(2 x D-sub mini 15 pin). The priority switch system allows the user to  
assign priority to either input signal.  
Contact EIZO dealers for information about optional cables.  
Be sure that the monitor and the PC are both switched off before  
connecting them.  
Selecting the Active Input  
Input Signal  
Selection Button  
The Input signal selection button on the front panel can be used to  
select Signal 1 or Signal 2 as the active input.  
The ScreenManager Input Prioritysetting (in the Othersmenu)  
can be used to set up the automatic selection of the input. See page  
31 for details.  
1
INSTALLATION  
14  
 
2 USING THE SCREENMANAGER  
2-1 How to use the ScreenManager  
About ScreenManager  
E
As shown on the display, the ScreenManager is used to adjust the LCD  
monitor. Adjustments are made using the Enter and Control buttons (up,  
down, right and left) located on the front panel.  
Enter Button  
Control Buttons  
ScreenManager Menus  
ScreenManager consists of a main menu and six sub menus: Screen,  
Color, PowerManager, Others, Informationand Language.”  
Animated icons on each menu allows for easy adjustment.  
Main menu  
The menu message for the ScreenManager can be displayed in six  
languages: English, German, French, Italian, Spanish and Swedish.  
Primary setting is English. For details, please refer to the next page.  
2
USING THE SCREENMANAGER  
15  
 
Sub menus  
Functions  
<Screen>  
Reference  
page 19  
page 26  
page 28  
page 30  
<Color>  
<PowerManager>  
<Others>  
<Information>  
This menu shows the current ScreenManager  
settings. The menu contains three pages.  
Pressing the ENTER key displays the  
following information:  
Page 1: Screenmenu settings  
Page 2: Colorand PowerManager”  
settings  
Page 3: Othersmenu settings  
· The current ScreenManager setting is  
displayed even if the input selection has  
been manually overridden by the use of the  
input signal selection button.  
<Language>  
First select the preferred language to use.  
The ScreenManagers messages will appear  
in the selected language. This will become  
the default language when you use the  
ScreenManager.  
2
USING THE SCREENMANAGER  
16  
 
How to use the ScreenManager  
Entering the ScreenManager  
E
Push the Enter button once to display the main menu of the  
ScreenManager.  
Enter the Settings  
(1)To enter any sub menu icon, highlight the desired icon by using the  
Control buttons (up, down, right and left) and push the Enter button.  
The sub menu appears.  
(2)Use the Control buttons to select the desired setting icon and push the  
Enter button.  
(3)The setting menu appears. Use the Control buttons to make all  
required adjustments.  
Exit the ScreenManager  
(1)To return to the main menu, select the Returnicon or push the  
down button twice, followed by the Enter button.  
(2)To save and exit the ScreenManager, select the Exiticon and push  
the Enter button. Double clicking the Enter button at any time also  
exits the ScreenManager menu.  
Leaving the ScreenManager idle for 45 seconds or more will turn the  
adjustment off automatically, without the adjustment's saved.  
2
USING THE SCREENMANAGER  
17  
 
Shortcut keys  
Brightness and contrast can be adjusted directly without any need to  
enter the ScreenManager. Press the Control buttons to adjust the settings  
and then the Enter button to save all changes.  
See the diagram below for adjustment directions.  
The brightness and contrast functions are also available in the  
ScreenManager Screenmenu.  
Brightness  
Contrast  
up  
Contrast  
down  
up  
Brightness  
down  
Adjustment Lock  
Auto Adjustment button  
Power Button  
The ScreenManager operation can be disabled by holding down the Auto  
adjustment button while switching on the LCD monitors power. This  
will disable (lock) the Enter button and Auto adjustment button,  
protecting from accidental changes. To unlock the buttons, switch the  
power off. Switch the power on while pressing the Auto adjustment  
button.  
Note the brightness and contrast can be adjusted using the shortcut keys  
even while the Enter button is locked. After making such an adjustment,  
the Enter button can be used to clear the brightness/contrast adjustment  
menu from the screen. Furthermore, the Input signal selection button  
can still be used while the adjustment lock is on.  
2
USING THE SCREENMANAGER  
18  
 
2-2 Screen Adjustment  
E
About Screen Adjustments  
Entering the ScreenMananger, select the Screenicon and push the Enter  
button to show the Screenmenu.  
Screenadjustments for the LCD monitor should be used in suppressing  
screen flickering and also for adjusting the screen to its proper position.  
There is only one correct position for each display mode. It is also  
recommended to use the ScreenManager function when first installing  
the display or whenever changing the system.  
For convenience, an easy set-up Program installed on the utility disk to  
assist in the set-up procedure is provided. For set up see the next page.  
The following common display modes have been preset in the LCD  
monitors memory, and require no screen adjustment. If the mode input  
to the LCD monitor is not one of the preset modes, the adjustments must  
be made using the Auto adjustment button and ScreenManager Screen”  
menu.  
Mode  
1
2
3
4
5
6
7
8
9
640 x 480 (-85 Hz)  
VGA 720 x 400 (70 Hz)  
800 x 600 (-75 Hz)  
Apple Macintosh 832 x 624 (75 Hz)  
1024 x 768 (-85 Hz)  
Apple Macintosh 1152 x 870 (75 Hz)  
Sun WS 1152 x 900 (-76 Hz)  
1280 x 960 (-85 Hz)  
1280 x 1024 (-75 Hz)  
19  
2
USING THE SCREENMANAGER  
 
Adjustment Procedure  
Overview  
(1) Install and run the "Screen Adjustment Program"  
in the utility disk.  
(2) Push the Auto adjustment button.  
(3) Enter the ScreenManager and select the  
"Screen" menu.  
(4)  
"Clock" adjustment  
Horizontal bars appear.  
OK  
(5)  
(6)  
"Phase" adjustment  
"Position" adjustment  
(7)  
(8)  
Confirm the "Resolution".  
"Contrast/Brightness" adjustment  
(9) Exit the ScreenManager.  
Allow the LCD monitor to warm up for at least 20 minutes before  
making adjustments.  
To make adjustment easily, install and run the Screen Adjustment  
Programin the attached utility disk. Before adjustment, read the  
readme.txtfile.  
Do not continuously press the Control buttons (up, down, right and left  
buttons) on the front panel, as the adjustment value will change quickly  
and make it difficult to locate the most suitable adjustment point.  
2
USING THE SCREENMANAGER  
20  
 
Procedure  
E
Please adjust the screen using the following procedure.  
(1)Having read the readme.txtfile, install and run the Screen  
Adjustment Programin the utility disk.  
Step by step adjustment is provided by the wizard guide. Follow the  
wizard or the procedures (2) to (8) below.  
If the user's operation system has no utility disk (e.g. OS/2), we  
recommend setting the desktop pattern to that as shown in the  
diagram below.  
Every-other-dot pattern  
(2) Auto Adjustment  
Push the Auto adjustment button on the front panel. The following  
message will appear and remain on the screen for 5 seconds. While  
the message is on the screen, push the button again to automatically  
adjust the screen position. If you do not wish to do adjust the screen,  
do not push the button again. The message will disappear.  
The Auto adjustment function is intended for use on Macintosh and  
PCs running Windows. It may not function properly if any of the  
following applies:  
PC running MS-DOS (not Windows).  
The background color for the wallpaperor desktoppattern is  
set to black or dark.  
Some signals from some graphics boards may not function  
properly. Follow the adjustment procedure next page.  
During the Auto adjustment, some icons (e.g. clock icon) appear  
on the screen continuously.  
(Example)  
21  
2
USING THE SCREENMANAGER  
 
(3) Enter the ScreenManager Screenmenu.  
(4) ClockAdjustment  
Function  
Decreases the vertical bars of distortion.  
a)Select the Clockicon and push the Enter  
button to enter the Clockmenu”  
b)If vertical bars appear, these can be eliminated  
by adjusting the right and left buttons.  
i) If the screen is free from any bars of distor-  
tion, proceed to Positionadjustment.  
ii)If horizontal flickering or horizontal bars  
appear, proceed to Phaseadjustment.  
· The LCD monitor is designed for analog input  
signals from a standard graphics board. The  
analog input signal is converted to a digital signal  
by the LCD circuitry. To convert the signal  
correctly, the LCD monitor needs to produce the  
same number of clock pulses as the dot clock of  
the graphics system. When the clock pulse is not  
correctly set, some vertical bars of distortion are  
displayed on the screen.  
· When adjusting the Clock, the horizontal screen  
size will also change.  
2
USING THE SCREENMANAGER  
 
22  
(5) PhaseAdjustment  
Function  
E
Eliminates the horizontal bars of distortion.  
a)Select the Phaseicon and push the Enter  
button to show the Phasemenu.  
b)If horizontal bars appear, these can be eliminated  
by adjusting the right and left buttons.  
c) After finishing the adjustment, push the Enter  
button to memorize the settings and return to the  
Screenmenu.  
· “Phaseadjustments should be done after  
adjusting the Clock.  
· Horizontal bars may not completely disappear  
from the screen depending on the PC.  
· The phase adjustment decides the sampling point  
for converting the analog input signal to a digital  
signal. Adjusting the Phaseafter the Clock”  
adjustment will produce a clear screen.  
(6) Position Adjusment  
Function  
Controls the screen position.  
a)Select the Positionicon and push the Enter  
button to enter the Position menu. Adjustment  
markers are displayed on each corner of the screen.  
b)Adjust the position of the upper left corner of the  
image using the Control buttons in order to align  
the screen.  
· If vertical bars of distortion appear after finishing  
the Positionadjustment, return to Clockmenu  
and repeat the previously explained adjustment  
procedure (Clock” “Phase” “Position).  
23  
2
USING THE SCREENMANAGER  
 
(7) ResolutionAdjustment  
Function  
Controls the contrast of the screen.  
a)Select the Contrasticon and push the Enter  
button to show the Contrast/Brightnessmenu.  
b)Confirm if the resolution now being displayed is  
the same as the input resolution. If it is not,  
adjust the vertical resolution using the up and  
down button and adjust the horizontal resolution  
using the right and left buttons.  
c) After finishing the adjustment, push the Enter  
button to memorize the settings and return to  
the Screenmenu.  
Smaller than the actual screen images.  
Adjusted to actual  
screen size.  
Larger than the actual screen images.  
(8) ContrastAdjustment  
Function  
Controls the contrast of the screen.  
a) Select the Contrasticon and push the Enter  
button.  
b) Press the Auto adjustment button on the front  
panel while displaying the Contrast/Brightness  
menu to automatically adjust contrast.  
c) The screen blanks for a moment and adjusts the  
contrast to the maximum level of the current  
input signal. (continued)  
OK  
Too High  
Too Low  
2
USING THE SCREENMANAGER  
 
24  
Function  
E
* In the case of the percentage color flickering  
between yellow and white, please note that this is  
not an error but actually the most optimum  
adjustment point.  
* The brightness of the entire screen is controlled  
by changing the Brightnesscontrols. No  
contrast adjustment is required except when the  
graphics board or the resolution is changed from  
the previous one.  
d) Adjust the Brightnessas desired using the up  
and down button.  
e) After finishing the adjustment, push the Enter  
button to memorize the settings and return to the  
Screenmenu.  
(9) Exit the ScreenManager  
a) To return to the main menu, select the Returnicon or push the  
down button twice, followed by the Enter button.  
b) To exit the ScreenManager, select the Exiticon and push the  
Enter button. Double clicking the Enter button at any time also  
exits the ScreenManager menu.  
In the Enlargedmode and the Fullmode (refer to the page 30), the  
following adjustment is available.  
Function  
Smoothing  
Displays blurred texts distinct.  
·This adjustment is disable when the resolution  
is 1280 x 1024 or 1280 x 960.  
25  
2
USING THE SCREENMANAGER  
 
2-3 Color Adjustment  
About Color Adjustments  
Entering the ScreenManager, select the Coloricon and push the enter  
button to show the Colormenu.  
The ScreenManager Colormenu provides 3 color setting modes; 1, 2,  
and 3. You can also adjust the color settings for each mode and store  
them for future use.  
Allow the monitor to warm-up for at least 20 minutes before making  
an adjustment.  
Color Mode  
Function  
Color Mode  
(Standard)  
Adjusts:  
Color Mode  
Mode 1(default): The normal white color. It is  
the maximum contrast level.  
Please use this mode normally.  
Mode 2:  
Mode 3:  
The white color tone is  
slightly bluish.  
The white color tone is  
slightly reddish.  
· The contrast level is reduced in Mode 2 and 3.  
(a) Select the Color Modeicon from the Color”  
menu and push the Enter button.  
(b) Select option 1, 2 or 3 and push the Enter  
button. A long beep will be heard indicating the  
adjustment settings have been saved.  
2
USING THE SCREENMANAGER  
26  
 
Gain Adjustments  
E
By adjusting the red, green and blue color tones for each mode, custom  
colors can be defined. Please use this function when high precision color  
adjustment is required.  
Before you attempt to change the colors, always start with the color  
settings set to the default setting by using the Reseticon in each  
color mode.  
Function  
Adjusts:  
Gain  
Gain  
Gain  
The Gain adjustment has no effect on the  
starting point (the black level). It changes only  
the ending point (the white level). The Gain  
adjustment is used to fine tune the whites and  
light grays to an even balance.  
a) Select the Gainicon. The screen shown on  
the left will appear.  
b) Adjust each color until you can create a  
uniform white screen.  
c) To register the adjustment, select the Save”  
icon and then push the Enter button. If the  
settings are not saved, all adjustments will be  
lost.  
d) Finally, readjust the contrast in the Screen”  
menu to get the best image clarity.  
· The adjustment works effectively only when the  
percentages appear black. Magenta percentage  
means the colors saturation. Lower the  
percentage till its color becomes black.  
· After making the color settings, readjust the  
contrast to get the best definition and color  
intensity for the displayed image.  
· “Reset”  
You can recall the default color gain setting for  
the current color mode (1, 2, 3) using the Reset”  
icon.  
· The values shown in percentages represent the  
current level within the specific adjustment only.  
They are available only as a reference tool. (To  
create a uniform white or black screen, the  
percentages for each will probably not be the  
same.)  
2
USING THE SCREENMANAGER  
27  
 
2-4 Power-save Setup  
Function  
PowerManager  
Power saving adjustment  
The EIZO PowerManager functions comply with  
the VESA DPMS standard and adopt a power  
saving method, EIZO MPMS.  
As an Energy Star® Partner, Eizo Nanao  
Corporation has determined that this  
product meets the Energy Star  
guidelines for energy efficiency.  
· Do your part to conserve energy, turn off the  
monitor when you are finished using it. Discon-  
necting the monitor from the power supply is  
recommended to save energy completely.  
· When the monitor is in a power saving mode, the  
optional EIZO i·Sound speaker unit will turn off.  
· Even if the monitor is in a power saving mode,  
USB compliant devices function when they are  
connected to the monitors USB (both the  
upstream and the downstream ports). Therefore,  
power consumption of the monitor will change  
according to the connected devices even if the  
monitor is in a power saving mode.  
Set-up Procedure  
VESA DPMSsystem works with the VESA DPMS signal.  
EIZO MPMSsystem works with a screen saver software and  
EnergySaver for Macintosh which blanks the screen (totally black screen).  
1) Set the monitor to match the PCs power saving software, as follows.  
For the PC setup, please refer to the users manuals of the PC and  
the graphics board.  
Monitor setting for matching the PC:  
PC  
PC Power saving  
Monitor setting  
PC/AT and compatibles  
(VESA DPMS activated)  
VESA DPMS (Signal)  
VESA DPMS  
PC/AT and compatibles  
(VESA DPMS  
Windows  
(Control Panel/Display/  
ScreenSaver: Blank Screen)  
EIZO MPMS  
inactivated)  
Macintosh  
Energy Saver  
EIZO MPMS  
EIZO MPMS  
ScreenSaver software  
After Dark/Blanksettings  
28  
USING THE SCREENMANAGER  
 
2) Select VESA DPMSor EIZO MPMS.  
E
When VESA DPMSis selected, the monitor shifts into the power  
saving mode in 5 seconds after recognizing either STAND-BY,  
SUSPEND, OR OFF signal. When EIZO MPMSis selected, the  
monitor shifts into the power saving mode in 5 seconds after PC's  
ScreenSaver blanks the screen.  
VESA DPMS Power Saving Method  
VESA DPMS utilizes four signals: ON, STANDBY, SUSPEND, and OFF.  
The monitor detects these signals from the graphics board and executes  
power saving accordingly, as illustrated below.  
Signal  
Screen  
LED  
Power Consumption  
ON  
Operation  
Green  
59 W(L660), 47 W(L661)  
67 W(L680)  
STAND-BY/  
Blank (power  
Yellow  
less than 3 W  
SUSPEND/OFF saving mode)  
EIZO MPMS power saving method  
If the keyboard or the mouse are not in use during operation, the  
monitor will enter PowerManager Mode  
Signal  
Screen  
LED  
Power Consumption  
ON  
Operation  
Green  
59 W(L660), 47 W(L661)  
67 W(L680)  
After  
Duration  
Blank (power  
saving mode)  
Yellow  
less than 3 W  
What is VESA DPMS?  
The acronym VESA stands for Video Electronics Standards  
Association,and DPMS stands for Display Power Management  
Signaling.DPMS is a communication standard that PCs and  
graphics boards use to implement power savings at the monitor side.  
What is EIZO MPMS?  
EIZO MPMS, "EIZO Monitor PowerManager Signaling", also enables  
to execute power saving at the monitor side. EIZO MPMS recognizes  
the video signals from the PC when the PC is in a power saving mode,  
and reduces energy consumption of the monitor.  
What is Energy Star?  
Energy Staris a set of power-saving guidelines issued by the U.S.  
Environmental Protection Agency (EPA). The guidelines apply to PC  
systems and peripherals.  
29  
2
USING THE SCREENMANAGER  
 
2-5 Other Settings  
About Other Settings  
All of the icons shown in the ScreenManager Othersmenu are  
described below.  
Function  
Screen Size  
Selects Screen Size  
There are three screen size as follows.  
Full  
Displays the picture on the screen in full,  
Screen  
irrespective of the picture's resolution.  
Since the vertical resolution and the  
horizontal resolution are enlarged in  
different rates, some images may appear  
distorted.  
Enlarged Displays the picture on the screen in full,  
Screen  
considering the width of the screen.  
Since the pixel elements are fixed, some  
lines of the characters or pictures may be  
displayed with a different width.  
Normal  
Screen  
Displays the picture at the actual  
resolution  
Enlarged  
Normal  
Full  
1280 x 960  
640 x 480  
1280 x 1024  
1280 x 960  
1024 x 768  
1280 x 1024  
· The resolution of 1280 x 960 and 1280 x 1024 do  
not change the screen sizes in the full screen or  
the enlarged screen mode.  
· At the Enlargedmode, Smoothingadjustment is  
available for having the blurred letters distinct.  
Please refer to the page 25.  
2
USING THE SCREENMANAGER  
30  
 
Function  
E
Border  
Intensity  
Changes the brightness of the black area  
surrounding the displayed image.  
· This adjustment is disable in full screen mode.  
What is the Border Intensityfunction?  
With lower resolutions of (640 x 480, 800 x 600,  
1024 x 768, etc.) the image is displayed at the  
center of the screen and the outer area (border) is  
usually black. The Border Intensityfunction can  
set the brightness of this border area to any  
brightness level that maybe desired.  
Selects which PC will have priority to control the  
monitor when utilizing two PCs.  
Input Priority  
Priority Performance  
setting  
If signals from both inputs are present, the  
monitor gives preference to Signal 1 for the  
cases shown below:  
When the power of the monitor is turned  
Signal 1  
ON (see note 1).  
When the signal input to Signal 1 is  
changed even if active input was Signal 2.  
If signals from both inputs are present, the  
monitor gives preference to Signal 2 for the  
cases shown below:  
When the power of the monitor is turned  
ON (see note 1).  
When the signal input to Signal 2 is  
changed even if active input was Signal 1.  
Signal 2  
Manual  
The monitor will not detect signals  
automatically in this mode. Select the active  
input by pressing the input signal selection  
button on the monitors front panel.  
Automatically Turns off the Monitor  
Off Timer  
What is Off Timer?  
The Off Timer function allows the user to set the  
time in which the monitor will be in operation,  
called the On Periodand automatically shifts the  
operation into the Power Offmode when the set  
On Periodexpires. The Off Timer function was  
created to reduce afterimage characteristics that  
are particular to LCD monitors when the monitor  
screen is left on for a long period without use.  
31  
2
USING THE SCREENMANAGER  
 
Function  
1)Select the Off Timericon and press the Enter  
button to display Off Timerselect menu.  
2) Select Enableand press the enter button.  
3) Press the right/left key to adjust how long (1 to 23  
hours) the monitor should be in the On Period.  
Then, press the enter button to return to the  
othersmenu.  
4) Select the Exiticon and push the Enter button  
to exit the ScreenManager.  
Advance notice (Beep and LED flashing green) will  
be given 15 minutes before the monitor will  
automatically turn off and enter the Power Off”  
modes .  
· “Off Timerfunction works while Power Manager is  
active, but there would be no advanced mode  
before the monitor's powers switching off.  
To Delay Entering Power Off  
To delay entering the Power Offmode, press the  
power button on the front panel located to the left of  
the LED light during the advance notice period. The  
monitor will continue to operate for an additional 90  
minutes. There will be another advance notice for  
15 minutes as described. Delayed entrance into the  
Power Offperiod can be extended as many times  
as desired.  
Turns the beeper on or off.  
Beep  
Short beep  
· ScreenManager item selected.  
· ScreenManager parameter adjusted  
to minimum or maximum limit.  
· Input signal selection button pressed.  
Long beep  
· Auto Adjustment button pressed.  
· ScreenManager data-save executed.  
Four short  
beeps  
· Monitor not connected correctly.  
· PC turned off.  
· Monitor received unsupported signal  
frequency.  
Two short · Monitor is in the advance notice mode  
beeps  
every  
of the Off Timer. The power will be  
off within fifteen minutes.  
fifteen  
seconds  
2
USING THE SCREENMANAGER  
 
32  
Function  
E
Adjusts Menu's Position  
Menu Position  
Returns to Factory Default  
Reset  
Default setting are as follows:  
Screen:  
Contrast  
Brightness  
Smoothing  
80 %  
100 %  
3
Color  
Mode 1/Normal white  
PowerManager VESA DPMS  
Others  
Screen Size  
Input Priority  
Off Timer:  
Beep  
Normal  
Signal 1  
Disable  
On  
Language  
English  
33  
2
USING THE SCREENMANAGER  
 
3 MAKING USE OF USB  
-For USB Compliant System Environments-  
This monitor provides a hub which supports the USB standard. When  
connecting to a USB compliant PC or another hub, the monitor functions as  
a hub to which the USB compliant peripherals can be easily connected.  
Required system environment  
PC equipped with USB ports or another USB hub connected to the USB  
compliant PC  
Windows 98/2000 // Mac OS 8.5.1 or later  
USB cable (Sold separately)  
The USB hub function may not work properly depending on the PC, OS  
or peripherals. Please consult the manufacturer of each device about  
the USB support.  
When the monitor is not on, the peripherals connected to the down-  
stream ports will not operate.  
Even if the monitor is in a power saving mode, the devices connected to  
the monitors USB ports (both the upstream and the downstream) will  
function.  
Connecting to the USB HUB  
Do not connect the downstream port of the monitor to any peripherals  
until finishing the USB function.  
The followings are procedures for the Windows 98 Second Edition/2000  
and Mac OS.  
1) Connect the monitor to the PC with the signal cable (See page 11) first,  
then turn on the PC.  
2) Connect the upstream port of the monitor to the downstream port of the  
USB compliant PC or another hub by using the USB cable .  
Up-  
Upstream connector  
stream  
Ports  
Upstream Port:  
Connect the USB compliant  
PC or another hub using the  
USB cable.  
To Downstream Ports  
of the PC or Another  
Hub  
After connectiong the USB cable, the USB function can be set up  
automatically.  
3
MAKING USE OF USB  
34  
 
3) After setting up, the monitors USB hub is available for connecting USB  
compliant peripherals to the downstream ports of the monitor.  
E
(Example of connection)  
Monitor  
Scanner  
USB  
Cable  
Printer  
Digital  
Camera  
PC  
Mouse  
Keyboard  
Rear port (Example)  
Downstream  
Downstream connector  
Downstream ports:  
Connect the cables from USB  
compliant peripherals such  
as a mouse, keyboard, etc.  
3
MAKING USE OF USB  
35  
 
Troubleshooting  
Problems  
Points to check with possible solutions  
1) USB function  
Check that the USB cable is correctly  
connected.  
cannot be setup.  
Check that the PC and OS is compliant to the  
USB. (For the USB support of the system,  
consult the manufacturer of each system.)  
Check the PCs BIOS setting for the USB.  
(For details, refer to the manual of the PC.)  
2)PC is hung up.  
Check that the USB cable is correctly  
connected.  
The peripherals  
connected to the  
downstream  
ports do not  
operate.  
Check the downstream ports by connecting  
the peripherals to other downstream ports.  
If the problem is solved by doing this, contact  
an EIZO dealer.  
Try executing the following method.  
* Restarting the PC  
* Connecting the PC and peripherals directly  
If the problem is solved by doing this, contact  
an EIZO dealer.  
The power button of the APPLE keyboard  
does not operate if it is connected to the EIZO  
USB Hub. Please connect the keyboard  
directly with the PC. Refer to the instruction  
of the PC for details.  
3
MAKING USE OF USB  
36  
 
4 TROUBLESHOOTING  
This page presents problems that can be corrected by the user. If a  
problem persists even after applying the suggested remedies, contact an  
EIZO dealer.  
E
No picture  
Problems  
Points to check with possible solutions  
1) Indicator status: OFF  
2) Indicator status: GREEN  
Check that the power cord is securely connected.  
Try pressing a key on the keyboard, or clicking the  
mouse. (The screen-saver software may be active.)  
Check brightness and contrast settings. Minimum  
settings will cause screen to be blank.  
Try pressing the power button. (The off timer  
may be active.)  
3) Indicator status: YELLOW  
(flashing)  
Try pressing a key on the keyboard, or clicking the  
mouse. (The screen-saver software may be active.)  
4) Indicator status: YELLOW  
If the problem persists, switch off the monitor  
main power for a few minutes, then switch it back  
on and try again.  
5) “No signal detected” error  
message appears.  
Check that the PC is switched ON.  
Check that the signal cable is properly connected  
to the graphics board or PC.  
Check that the graphics board is correctly inserted  
in the PC.  
Switch the signal input by pushing the input signal  
selection button on the front control panel.  
For Windows 95/98 users, install the “Monitor  
information file” in the utility disk.  
Whenever an error signal message appears, the signal frequency will be displayed  
in red.  
Error messages will remain on the screen for 30 seconds, and then disappear. An  
error message may not appear at all if the signal frequency is extremely high or  
extremely low.  
37  
4
TROUBLESHOOTING  
 
Imaging problems  
Problems  
Points to check with possible solutions  
1) “Out of range” error  
message appears.  
Use the graphics board’s utility software to change  
the frequency setting. (Refer to the manual of the  
graphics board.)  
(Example)  
For Windows 95 users (OSR 2.0 or newer)/98,  
restart the PC in a safe mode and change the  
frequency at the "Display" setting in the PC.  
Whenever an error signal message appears, the signal frequency will be displayed in  
red.  
2) Display position is incorrect.  
Adjust the image position using the “Position” icon  
in the ScreenManager “Screen” menu. See page 23.  
If the problem persists, use the graphics board's  
utility software to change the display position if  
available. (It may be called “back-porch”.)  
3) Vertical bars of distortion  
appear.  
Decrease the vertical bars using the “Clock” icon in  
the ScreenManager “Screen” menu. See page 22.  
4) Letters and lines appear  
blurred.  
Adjust the blurred lines using “Smoothing”  
adjustment. Please refer to the page 25.  
5) Distortion appears like the  
figure below.  
This happens when both composite (X-OR) input  
signal and separate vertical synchronizing signal are  
input. Please select either of those.  
4
TROUBLESHOOTING  
 
38  
Problems  
Points to check with possible solutions  
E
6) Horizontal bars of distortion  
appear.  
Decrease the horizontal bars using the “Phase” icon  
in the ScreenManager “Screen” menu. See page 23.  
Adjust the contrast and brightness using the  
ScreenManagers Screen menu. See page 24.  
7) The screen is too bright or too  
dark.  
(The backlight of the LCD monitor has a fixed life  
span. When the screen becomes dark or begins to  
flicker, please contact your dealer.)  
When the screen image has been changed after  
displaying the same image for a long period,  
afterimage may appear. Use the Off Timer function  
and avoid keeping the screen on all the time.  
8) Afterimages appear.  
·L660 Open a black pattern window and keep the  
monitor on for a while.  
·L661 Open a white pattern window and keep the  
monitor on for a while.  
·L680 Open a black pattern window and keep the  
monitor on for a while.  
9) Fingerprints remain on the  
screen.  
Leaving the screen white may solve the problem.  
10)The screen has defective  
pixels (e.g. slightly light or  
dark).  
This is due to the characteristics of the panel itself,  
and not the LCD product.  
Other  
Points to check with possible solutions  
Problems  
Some PCs without PC-Exchange do not allow the  
utility disk to be opened. Please set the desktop  
pattern to ever-other-dot before adjustment. See  
page 21.  
1) The utility disk is unable to be  
opened (for Macintosh only).  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while pressing  
the Auto adjustment button switch the power on.  
See page 18.  
2) • The Enter button does not  
operate.  
• The Auto adjustment  
button does not operate.  
39  
4
TROUBLESHOOTING  
 
Points to check with possible solutions  
Problems  
The Auto adjustment function is intended for use on  
Macintosh and IBM compatibles PCs running  
Windows. It may not work properly if either of  
the following applies.  
3) The Auto adjustment button  
does not work properly.  
-
You are running an AT-compatible PC on MS-  
DOS (not Windows).  
-
The background color for the “wallpaper” or  
“desktop” pattern is set to black.  
Some signals from the graphics boards may not  
function properly. Follow the adjustment  
procedure on page 20, adjust step by step using  
the “Screen” menu.  
4) Frequency does not change  
after installing “Monitor  
information file” in the  
attached utility disk on  
Windows 95/98.  
Use the graphics board’s utility software to change  
the input signal frequency.  
For problems with USB function, refer to the troubleshooting on page 36.  
4
TROUBLESHOOTING  
40  
 
5 CLEANING  
WARNING  
E
Keep liquids away from the monitor.  
Spillage into the cabinet may result in fire, electric shock, or  
equipment damage.  
If an object or liquid falls/spills into the cabinet, unplug the  
monitor immediately. Have the unit checked by a qualified  
service engineer before using it again.  
CAUTION  
To ensure safety, always unplug the monitor before  
cleaning it.  
Cleaning the monitor while it is plugged into a power outlet  
may result in electric shock.  
Periodically clean the area around the plug.  
Buildup of dust, water, or oil on the plug may result in fire.  
Dust accumulation within the monitor may result in fire or  
equipment failure.  
Please keep the monitor in a dust-free environment.  
Never use thinner, benzene, alcohol (ethanol, methanol, or  
isopropyl alcohol), abrasive cleaners, or other strong  
solvents, as these may cause damage to the cabinet or  
LCD.  
Periodic cleaning is recommended to keep the monitor looking  
new and to prolong its operational lifetime. Clean the cabinet  
and LCD panel as follows.  
Cabinet  
To remove stains, wipe the cabinet with a soft, lightly moistened  
cloth using a mild detergent. Do not spray wax or cleaner  
directly onto the cabinet.  
LCD panel  
The LCD surface can be cleaned with a soft cloth, such as cotton  
or lens paper.  
If necessary, stubborn stains can be removed by moistening part  
of a cloth with water to enhance its cleaning power.  
5
CLEANING  
41  
 
6 SPECIFICATIONS  
L660  
Electrical Specifications  
LCD Panel  
46 cm (18.1 inch), TFT color LCD panel  
0.28 mm dot pitch, Anti-Glare Hard Coating  
Horizontal: 160°, Vertical: 160°  
(at Contrast Ratio > 10)  
Viewing Angle  
Scan Frequency  
Horizontal:  
Vertical:  
27 kHz-82 kHz (Automatic)  
50 Hz-85 Hz (Automatic) (1280 x 1024: up to 75 Hz)  
359 mm (H) × 287 mm (V) (14.1(H) x 11.3(V))  
(Viewable Image Size: 459 mm (18.07))  
100-120/220-240 VAC 10%, 50/60 Hz, 0.8/0.4 A  
Viewable Image Size  
Power Supply  
Power Consumption  
Normal/Max:  
59 W/79 W (with USB hub and the EIZO optional  
peripheral attached)  
Power Saving Mode:  
Input Connector  
Display Colors  
Less than 3 W (When the USB hub is not connected)  
D-Sub mini 15-pin x2  
16 million colors (max.)  
Recommended Resolution 1280 dots × 1024 lines  
Input Signal  
Sync:  
H/V Separate, TTL, Positive/Negative  
H/V Composite, TTL, Positive/Negative  
Sync on Green 0.3 Vp-p, Negative  
Analog 0.7 Vp-p/75 , Positive  
135 MHz  
Video:  
Dot Clock (Max.)  
Plug & Play  
VESA DDC1/2B  
Mechanical Specifications  
Dimensions  
430 mm (W) × 455 mm (H) × 218 mm (D)  
(16.9(W) × 17.9(H) × 8.6(D))  
Weight  
8.8 kg (19.4 lbs.)  
Weight (without tilt stand) 7.2 kg (15.9 lbs.)  
USB Specifications  
USB standard  
Rev. 1.1 complied self-powered hub  
Downstream power supply 500 mA for each (Max.)  
Communication speed  
USB ports  
12 Mbps (full), 1.5 Mbps (low)  
Upstream port x 1, Downstream ports x 4  
Environmental Specifications  
Temperature  
Operating: 0°C to 35°C (32°F to 95°F)  
Storage: -20°C to 60°C (-4°F to 140°F)  
Humidity  
30% to 80% R.H. Non-condensing  
Certifications and Standards  
100-120 VAC range  
UL/C-UL, FCC class B, TÜV Rheinland Ergonomics  
Approved, TCO99 (Applicable to gray ( standard )  
color version only), EPA ENERGY STAR® Program  
CE, CB, TÜV Rheinland/GS, TÜV Rheinland/ Ergonomics  
Approved, TCO99 (Applicable to gray ( standard ) color  
version only), EPA ENERGY STAR® Program  
220-240 VAC range  
6
SPECIFICATIONS  
 
42  
L661  
E
Electrical Specifications  
LCD Panel  
46 cm (18.1 inch), TFT color LCD panel  
0.28 mm dot pitch, Anti-Glare Hard Coating  
Horizontal: 140°, Vertical: 140°  
(at Contrast Ratio > 5)  
Viewing Angle  
Scan Frequency  
Horizontal:  
Vertical:  
27 kHz-82 kHz (Automatic)  
50 Hz-85 Hz (Automatic) (1280 x 1024: up to 75 Hz)  
359mm (H) × 287 mm (V) (14.1(H) × 11.3(V))  
(Viewable Image Size: 459 mm (18.07))  
100-120/220-240 VAC 10%, 50/60 Hz, 0.7/0.4 A  
Viewable Image Size  
Power Supply  
Power Consumption  
Normal/Max:  
47 W/69 W (with USB hub and the EIZO optional  
peripheral attached)  
Power Saving Mode:  
Input Connector  
Display Colors  
Less than 3 W (When the USB hub is not connected)  
D-Sub mini 15-pin x 2  
16 million colors (max.)  
Recommended Resolution 1280 dots × 1024 lines  
Input Signal  
Sync:  
H/V Separate, TTL, Positive/Negative  
H/V Composite, TTL, Positive/Negative  
Sync on Green 0.3 Vp-p, Negative  
Analog 0.7 Vp-p/75 , Positive  
135 MHz  
Video:  
Dot Clock (Max.)  
Plug & Play  
VESA DDC1/2B  
Mechanical Specifications  
Dimensions  
430 mm (W) × 455 mm (H) × 218 mm (D)  
(16.9(W) × 17.9(H) × 8.6(D))  
Weight  
8.8 kg (19.4 lbs.)  
Weight (without tilt stand) 7.2 kg (15.9 lbs.)  
USB Specifications  
USB standard  
Rev. 1.1 complied self-powered hub  
Downstream power supply 500 mA for each (Max.)  
Communication speed  
USB ports  
12 Mbps (full), 1.5 Mbps (low)  
Upstream port x 1, Downstream ports x 4  
Environmental Specifications  
Temperature  
Operating: 0°C to 35°C (32°F to 95°F)  
Storage: -20°C to 60°C (-4°F to 140°F)  
Humidity  
30% to 80% R.H. Non-condensing  
Certifications and Standards  
100-120 VAC range  
UL/C-UL, FCC class B, TÜV Rheinland Ergonomics  
Approved, TCO99 (Applicable to gray ( standard )  
color version only), EPA ENERGY STAR® Program  
CE, CB, TÜV Rheinland/GS, TÜV Rheinland/ Ergonomics  
Approved, TCO99 (Applicable to gray ( standard ) color  
version only), EPA ENERGY STAR® Program  
220-240 VAC range  
43  
6
SPECIFICATIONS  
 
L680  
Electrical Specifications  
LCD Panel  
46 cm (18.1 inch), TFT color LCD panel  
0.28 mm dot pitch, Anti-Glare Hard Coating  
Horizontal: 170°, Vertical: 170°  
(at Contrast Ratio > 10)  
Viewing Angle  
Scan Frequency  
Horizontal:  
Vertical:  
27 kHz-82 kHz (Automatic)  
50 Hz-85 Hz (Automatic) (1280 x 1024: up to 75 Hz)  
359mm (H) × 287 mm (V) (14.1(H) x 11.3(V))  
(Viewable Image Size: 459 mm (18.07))  
100-120/220-240 VAC 10%, 50/60 Hz, 0.9/0.5 A  
Viewable Image Size  
Power Supply  
Power Consumption  
Normal/Max:  
67 W/88 W (with USB hub and the EIZO optional  
peripheral attached)  
Power Saving Mode:  
Input Connector  
Display Colors  
Less than 3 W (When the USB hub is not connected)  
D-Sub mini 15-pin x2  
16 million colors (max.)  
Recommended Resolution 1280 dots × 1024 lines  
Input Signal  
Sync:  
H/V Separate, TTL, Positive/Negative  
H/V Composite, TTL, Positive/Negative  
Sync on Green 0.3 Vp-p, Negative  
Analog 0.7 Vp-p/75 , Positive  
135 MHz  
Video:  
Dot Clock (Max.)  
Plug & Play  
VESA DDC1/2B  
Mechanical Specifications  
Dimensions  
430 mm (W) × 455 mm (H) × 218 mm (D)  
(16.9(W) × 17.9(H) × 8.6(D))  
Weight  
7.4 kg (16.3 lbs.)  
Weight (without tilt stand) 5.8 kg (12.8 lbs.)  
USB Specifications  
USB standard  
Rev. 1.1 complied self-powered hub  
Downstream power supply 500 mA for each (Max.)  
Communication speed  
USB ports  
12 Mbps (full), 1.5 Mbps (low)  
Upstream port x 1, Downstream ports x 4  
Environmental Specifications  
Temperature  
Operating: 0°C to 35°C (32°F to 95°F)  
Storage: -20°C to 60°C (-4°F to 140°F)  
Humidity  
30% to 80% R.H. Non-condensing  
Certifications and Standards  
100-120 VAC range  
UL/C-UL, FCC class B, TÜV Rheinland Ergonomics  
Approved, TCO99 ( Applicable to gray ( standard )  
color version only), EPA ENERGY STAR® Program  
CE, CB, TÜV Rheinland/GS, TÜV Rheinland/ Ergonomics  
Approved, TCO99 ( Applicable to gray ( standard )  
color version only), EPA ENERGY STAR® Program  
220-240 VAC range  
6
SPECIFICATIONS  
 
44  
 
APPENDIX  
Pin Assignment  
Pin-Belegung  
Affectation des Broches  
2 x D-Sub mini 15 pin connectors  
Pin No.  
Signal  
Pin No.  
Signal  
No pin  
GGrroouunndd  
1
2
Red video  
9
Green video/  
Green video/  
10  
11  
12  
13  
Green video  
Shorted  
Composite  
(shorted)  
Composite Sync  
3
4
5
6
7
8
Blue video  
Ground  
Data  
H. Sync/H. V.  
.  
Composite Sync  
No pin  
Red ground  
Green ground  
Blue ground  
14  
15  
V. Sync  
Clock  
USB ports  
Upstream  
Downstream  
No.  
1
Signal  
VCC  
Comments  
Cable power  
Serial data  
2
- Data  
+ Data  
Ground  
3
Serial data  
(Series B connector) (Series A connector)  
4
Cable Ground  
APPENDIX  
ii  
 
Preset Timing Chart  
Timing-Übersichten  
Synchronisation des Signaux  
Based on the signal diagram shown below, 22 factory presets have been  
registered in the monitor's microprocessor.  
Der integrierte Mikroprozessor des Monitors unterstützt 22 werkseitige  
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).  
22 signaux ont été enregistrés en usine dans le microprocesseur du  
moniteur, conformément au diagramme de synchronisation ci-dessous.  
A
B
Front Porch  
Sync Period  
Vordere Schwarzschulter  
Synchronimpuls  
Front avant  
A
Délai de  
synchronisation  
C
D
E
F
Back Porch  
Blanking Period  
Display period  
Total cycle  
Hintere Schwarzschulter  
Austastzeit  
Front arrière  
Délai de clignotement  
Délai d'affichage  
Cycle total  
Display-Zeit  
Kompletter Zyklus  
Sync-Signalpegel  
H
Sync signal level  
Niveau du signal de  
synchronisation  
V
Video signal level  
Video-Signalpegel  
Niveau du signal vidéo  
iii  
APPENDIX  
 
Mode  
Dot Clock  
MHz  
Frequencies  
A: Front Porch  
B: Sync Period  
H
V
H
V
H
V
kHz  
Hz  
µs/  
Dot  
ms/  
Line  
µs/  
Dot  
ms/  
Line  
VGA  
0.636/  
16  
0.318/  
10  
3.813/  
96  
0.054/  
2
640 x 480 25.175  
31.468  
31.468  
35.00  
49.73  
68.68  
37.86  
37.5  
59.941  
70.087  
66.67  
74.55  
75.06  
72.81  
75.00  
85.01  
56.25  
60.32  
72.19  
75.00  
85.061  
60.00  
70.07  
75.03  
85.0  
VGA  
0.636/  
18  
0.381/  
12  
3.813/  
108  
0.064/  
2
720 x 400 28.322  
Macintosh  
640 x 480  
2.116/  
64  
0.086/  
3
2.116/  
64  
0.086/  
3
30.24  
57.28  
Macintosh  
832 x 624  
0.559/  
32  
0.020/  
1
1.117/  
64  
0.060/  
3
Macintosh  
1152 x 870 100.0  
0.320/  
32  
0.044/  
3
1.280/  
128  
0.044/  
3
VESA  
640 x 480  
0.508/  
16  
0.026/  
1
1.270/  
40  
0.079/  
3
31.5  
31.5  
36.0  
36.0  
40.0  
50.0  
49.5  
56.25  
VESA  
640 x 480  
0.508/  
16  
0.027/  
1
2.032/  
67  
0.080/  
3
VESA  
640 x 480  
1.556/  
56  
0.023/  
1
1.556/  
56  
0.069/  
3
43.27  
35.16  
37.88  
48.08  
46.88  
53.674  
48.36  
56.48  
60.02  
68.68  
61.974  
71.858  
74.763  
63.98  
79.97  
VESA  
800 x 600  
0.667/  
24  
0.028/  
1
2.000/  
72  
0.057/  
2
VESA  
800 x 600  
1.000/  
40  
0.026/  
1
3.200/  
128  
0.106/  
4
VESA  
800 x 600  
1.120/  
56  
0.770/  
37  
2.400/  
120  
0.125/  
6
VESA  
800 x 600  
0.323/  
16  
0.021/  
1
1.616/  
80  
0.064/  
3
VESA  
800 x 600  
0.569/  
32  
0.019/  
1
1.138/  
64  
0.056/  
3
VESA  
1024 x 768 65.0  
0.369/  
24  
0.062/  
3
2.092/  
136  
0.124/  
6
VESA  
1024 x 768 75.0  
0.320/  
24  
0.053/  
3
1.813/  
136  
0.106/  
6
VESA  
1024 x 768 78.75  
0.203/  
16  
0.017/  
1
1.219/  
96  
0.050/  
3
VESA  
1024 x 768 94.5  
0.508/  
48  
0.015/  
1
1.016/  
96  
0.044/  
3
Workstation  
1152 x 900 94.2  
0.425/  
40  
0.032/  
2
1.359/  
128  
0.065/  
4
66.141  
76.202  
74.763  
60.02  
75.02  
Workstation  
1152 x 900 107.50  
0.223/  
24  
0.028/  
2
1.265/  
136  
0.111/  
8
Macintosh  
1280 x 960 126.2  
0.190/  
24  
0.013/  
1
1.204/  
152  
0.040/  
3
VESA  
1280 x 1024 108.0  
0.444/  
48  
0.016/  
1
1.037/  
112  
0.047/  
3
VESA  
1280 x 1024 135.0  
0.119/  
16  
0.013/  
1
1.067/  
144  
0.038/  
3
APPENDIX  
iv  
 
C: Back Porch  
D: Blanking Period  
E:Display Period  
F:Total Cycle  
H
V
H
V
H
V
H
V
µs/  
Dot  
ms/  
Line  
µs/  
Dot  
ms/  
Line  
µs/  
Dot  
ms/  
Line  
µs/  
Dot  
ms/  
Line  
1.907/  
48  
1.048/  
33  
6.356/  
160  
1.430/  
45  
25.442/  
640  
15.254/  
480  
31.778/ 16.683/  
800 525  
1.907/  
54  
1.111/  
35  
6.356/  
180  
1.556/  
49  
25.422/  
720  
12.712/  
400  
31.778/ 14.267/  
900 449  
3.175/  
96  
1.114/  
39  
7.407/  
224  
1.286/  
45  
21.164/  
640  
13.714/  
480  
28.571/ 15.000/  
864 525  
3.911/  
224  
0.784/  
39  
5.586/  
320  
0.865/  
43  
14.524/  
832  
12.549/  
624  
20.111/ 13.414/  
1152 667  
1.440/  
144  
0.568/  
39  
3.040/  
304  
0.655/  
45  
11.520/  
1152  
12.667/  
870  
14.560/ 13.322/  
1456 915  
A
3.810/  
120  
0.528/  
20  
5.587/  
176  
0.634/  
24  
20.317/  
640  
12.678/  
480  
26.413/ 13.735/  
832 520  
3.810/  
120  
0.427/  
16  
6.349/  
200  
0.533/  
20  
20.317/  
640  
12.800/  
480  
26.667/ 13.333/  
840 500  
2.222/  
80  
0.578/  
25  
5.333/  
192  
0.670/  
29  
17.778/  
640  
11.093/  
480  
23.111/ 11.764/  
832 500  
3.556/  
128  
0.626/  
22  
6.222/  
224  
0.711/  
25  
22.222/  
800  
17.067/  
600  
28.444/ 17.778/  
1024 625  
2.200/  
88  
0.607/  
23  
6.400/  
256  
0.739/  
28  
20.000/  
800  
15.840/  
600  
26.400/ 16.579/  
1056 628  
1.280/  
64  
0.478/  
23  
4.800/  
240  
1.373/  
66  
16.000/  
800  
12.480/  
600  
20.800/ 13.853/  
1040 666  
3.232/  
160  
0.448/  
21  
5.172/  
256  
0.533/  
25  
16.162/  
800  
12.800/  
600  
21.333/ 13.333/  
1056 625  
2.702/  
152  
0.503/  
27  
4.409/  
248  
0.578/  
31  
14.222/  
800  
11.179/  
600  
18.631/ 11.756/  
1048 631  
2.462/  
160  
0.600/  
29  
4.923/  
320  
0.786/  
38  
15.754/  
1024  
15.880/  
768  
20.677/ 16.666/  
1344 806  
19.20/  
144  
0.513/  
29  
4.053/  
304  
0.673/  
38  
13.653/  
1024  
16.599/  
768  
17.707/ 14.272/  
1328 806  
2.235/  
176  
0.466/  
28  
3.657/  
288  
0.533/  
32  
13.003/  
1024  
12.795/  
768  
16.660/ 13.328/  
1312 800  
2.201/  
208  
0.524/  
36  
3.725/  
352  
0.582/  
40  
10.836/  
1024  
11.183/  
768  
14.561/ 11.765/  
1376 808  
2.123/  
200  
0.500/  
31  
3.907/  
368  
0.597/  
37  
12.229/  
1152  
14.522/  
900  
16.136/ 15.119/  
1520 937  
1.712/  
184  
0.459/  
33  
3.200/  
344  
0.598/  
43  
10.716/  
1152  
12.525/  
900  
13.916/ 13.123/  
1496 943  
1.838/  
232  
0.482/  
36  
3.233/  
408  
0.535/  
40  
10.143/  
1280  
12.841/  
960  
13.376/ 13./376  
1688 1000  
2.296/  
248  
0.594/  
38  
3.778/  
408  
0.656/  
42  
11.852/  
1280  
16.005  
1024  
15.630/ 16.661/  
1688 1066  
1.837/  
248  
0.475/  
38  
3.022/  
408  
0.525/  
42  
9.481/  
1280  
12.804/  
1024  
12.504/ 13.329/  
1688 1066  
v
APPENDIX  
 
Dimensions  
Abmessungen  
Dimensions  
L661  
mm  
(inches)  
87  
(3.4)  
30.9  
(1.2)  
430  
27  
(16.9)  
(1.1)  
361  
(14.2)  
375  
(14.8)  
22°  
3°  
289.2  
(11.4)  
455  
(17.9)  
34.5  
(1.4)  
54.9  
(2.2)  
25° 25°  
20.5  
(0.8)  
120  
(4.7)  
270  
94.9  
(3.7)  
58  
(2.3)  
(10.6)  
218  
(8.6)  
FRONT VIEW  
SIDE VIEW  
TOP VIEW  
VORDERANSICHT  
VUE DE FACE  
SEITENANSICHT  
VUE DE COTE  
DRAUFSICHT  
VUE D'EN HAUT  
APPENDIX  
vi  
 
L660 / L680  
mm  
(inches)  
97  
(3.8)  
35.9  
(1.4)  
430  
(16.9)  
37  
A
(1.5)  
361  
(14.2)  
375  
(14.8)  
22°  
3°  
289.2  
(11.4)  
455  
(17.9)  
34.5  
(1.4)  
49.9  
(2.0)  
25° 25°  
20.5  
(0.8)  
120  
(4.7)  
270  
(10.6)  
104.9  
(4.1)  
48  
(1.9)  
218  
(8.6)  
FRONT VIEW  
SIDE VIEW  
TOP VIEW  
VORDERANSICHT  
VUE DE FACE  
SEITENANSICHT  
VUE DE COTE  
DRAUFSICHT  
VUE D'EN HAUT  
vii  
APPENDIX  
 
Applicable to gray  
( standard ) color  
version only  
Congratulations!  
You have just purchased a TCO99 approved and labelled product! Your choice has provided  
you with a product developed for professional use. Your purchase has also contributed to  
reducing the burden on the environment and also to the further development of environmen-  
tally adapted electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for  
encouraging the adaptation of goods and services to the environment. The main problem,  
as far as computers and other electronics equipment are concerned, is that environmen-  
tally harmful substances are used both in the products and during their manufacture. Since  
it is not so far possible to satisfactorily recycle the majority of electronics equipment, most  
of these potentially damaging substances sooner or later enter nature.  
There are also other characteristics of a computer, such as energy consumption levels,  
that are important from the viewpoints of both the work (internal) and natural (external)  
environments. Since all methods of electricity generation have a negative effect on the  
environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital  
to save energy. Electronics equipment in offices is often left running continuously and  
thereby consumes a lot of energy.  
What does labelling involve?  
This product meets the requirements for the TCO99 scheme which provides for  
international and environmental labelling of personal computers. The labelling scheme  
was developed as a joint effort by the TCO (The Swedish Confederation of Professional  
Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conserva-  
tion) and Statens Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: environment, ergonomics, usability,  
emission of electric and magnetic fields, energy consumption and electrical and fire safety.  
The environmental demands impose restrictions on the presence and use of heavy  
metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated  
solvents, among other things. The product must be prepared for recycling and the  
manufacturer is obliged to have an environmental policy which must be adhered to in  
each country where the company implements its operational policy.  
The energy requirements include a demand that the computer and/or display, after a  
certain period of inactivity, shall reduce its power consumption to a lower level in one or  
more stages. The length of time to reactivate the computer shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of  
the reduction of electric and magnetic fields, physical and visual ergonomics and good  
usability.  
Below you will find a brief summary of the environmental requirements met by this  
product. The complete environmental criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: +46 8 782 92 07  
Email (Internet): development@tco.se  
Current information regarding TCO99 approved and labelled products may also be  
 
Applicable to gray  
( standard ) color  
version only  
Environmental requirements  
Flame retardants  
Flame retardants are present in printed circuit boards, cables, wires, casings and  
housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%  
of the plastic in a computer casing can consist of flame retardant substances. Most  
flame retardants contain bromine or chloride, and those flame retardants are chemically  
related to another group of environmental toxins, PCBs. Both the flame retardants  
containing bromine or chloride and the PCBs are suspected of giving rise to severe  
health effects, including reproductive damage in fish-eating birds and mammals, due to  
the bio-accumulative* processes. Flame retardants have been found in human blood and  
researchers fear that disturbances in foetus development may occur.  
The relevant TCO99 demand requires that plastic components weighing more than  
25 grams must not contain flame retardants with organically bound bromine or  
chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes  
are available.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the colour-generating layers of  
certain computer displays. Cadmium damages the nervous system and is toxic in high  
doses. The relevant TCO99 requirement states that batteries, the colour-generating  
layers of display screens and the electrical or electronics components must not contain  
any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. It damages the nervous  
system and is toxic in high doses. The relevant TCO99 requirement states that batteries  
may not contain any mercury. It also demands that mercury is not present in any of the  
electrical or electronics components associated with the labelled unit.  
CFCs (freons)  
The relevant TCO99 requirement states that neither CFCs nor HCFCs may be used  
during the manufacture and assembly of the product. CFCs (freons) are sometimes used  
for washing printed circuit boards. CFCs break down ozone and thereby damage the  
ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light  
with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.  
Lead**  
Lead can be found in picture tubes, display screens, solders and capacitors. Lead  
damages the nervous system and in higher doses, causes lead poisoning. The relevant  
TCO99 requirement permits the inclusion of lead since no replacement has yet been  
developed.  
* Bio-accumulative is defined as substances which accumulate within living  
organisms.  
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.  
 
For U.S.A, Canada, etc. (rated 100-120 Vac) Only  
FCC Declaration of conformity  
We, the Responsible Party  
EIZO NANAO Technologies Inc.  
5710 Warland Drive, Cypress, CA 90630  
Phone: (562) 431-5011  
declare that the product  
Trade name: EIZO  
Model: FlexScan L660, L661, L680  
are in conformity with Part 15 of the FCC Rules. Operation of these products is  
subject to the following two conditions: (1)thisdevice may not cause harmful  
interference,and (2) this device must accept any interference received,including  
interference that may cause undesired operation.  
These equipments have been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If these equipments do cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures.  
*Reorient or relocate the receiving antenna.  
*Increase the separation between the equipment and receiver.  
*Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
*Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the users authority to operate the equipment.  
Note  
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep  
interference within the limits of a Class B digital device.  
-AC Cord  
-Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, enclosed)  
-EIZO USB Cable (MD-C93)  
Canadian Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.  
 
Hinweis zur Ergonomie :  
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1/59-98, EK1/60-98 mit  
dem Videosignal, 1280 Punkte x 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz  
Bildwiederholfrequenz, (non interlaced).  
Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem  
Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem  
Zeichenkontrast.)  
Recycle Auskunft  
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland  
zusammen mit dem Partner von Roll MBB Recycling GmbH.  
Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt  
werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen  
Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter  
der Internet-Adresse: www.eizo.de.  
 

Echo Trimmer HC 150 User Manual
Exmark Lawn Mower 4500 367 User Manual
Festool Sander ETS 150 EQ User Manual
Fisher Paykel Oven OR90SDBGFX User Manual
Fluke Wireless Office Headset 3458 HFL User Manual
Frigidaire Convection Oven FPGF3081K F User Manual
Gemini DJ Equipment CDM 3610 User Manual
GE Portable Generator GEK 45404F User Manual
GE Universal Remote 20309 User Manual
GE Washer GTWN2800DWW User Manual